A sensor with numeric readings. More...

Inheritance diagram for sensors::NumericSensor:

Classes
struct	DefaultThresholdsChangedEvent
	Event: Sensor default thresholds have changed. More...

struct	MetaData
	Numeric sensor metadata. More...

struct	MetaDataChangedEvent
	Event: Sensor metadata has changed. More...

struct	MinMax
	Numeric sensor minimum / maximum values. More...

struct	MinMaxChangedEvent
	Event: Sensor min or max value has changed. More...

struct	MinMaxResetEvent
	Event: Min / Max value has been reset. More...

struct	Range
	Range of possible sensor readings. More...

struct	Reading
	Numeric sensor reading. More...

struct	ReadingChangedEvent
	Event: Numeric sensor reading has changed. More...

struct	StateChangedEvent
	Event: Sensor state has changed. More...

struct	ThresholdCapabilities
	Threshold capabilities. More...

struct	Thresholds
	Numeric sensor thresholds. More...

struct	ThresholdsChangedEvent
	Event: Sensor thresholds have changed. More...

Public Member Functions
MetaData	getMetaData ()
	Retrieve the sensor metadata. More...

Thresholds	getDefaultThresholds ()
	Retrieve the sensor default thresholds. More...

Thresholds	getThresholds ()
	Retrieve the thresholds. More...

int	setThresholds (in Thresholds thresh)
	Change the thresholds. More...

Reading	getReading ()
	Get the sensor reading. More...

MinMax	getMinMax ()
	Get the min / max of sensor value. More...

void	resetMinMax ()
	Reset min / max of sensor value.

Public Member Functions inherited from sensors::Sensor
TypeSpec	getTypeSpec ()
	Retrieve the sensor type specification. More...

boolean	isTypeChangeAllowed ()
	Check whether the sensor type can be changed using setType(). More...

int	setType (in int type, in int unit)
	Set sensor type and unit. More...

Public Attributes
constant int	THRESHOLD_OUT_OF_RANGE = 1
	The threshold exceedes the sensor range. More...

constant int	THRESHOLD_INVALID = 2
	The threshold constraints are not met. More...

constant int	THRESHOLD_NOT_SUPPORTED = 3
	The sensor does not support setting this threshold. More...

Public Attributes inherited from sensors::Sensor
constant int	ERR_NOT_SUPPORTED = 1
	The operation is not supported. More...

constant int	NUMERIC = 0
	Sensor reading type More...

constant int	DISCRETE_ON_OFF = 1

constant int	DISCRETE_MULTI = 2

constant int	UNSPECIFIED = 0
	Sensor type More...

constant int	VOLTAGE = 1

constant int	CURRENT = 2

constant int	UNBALANCE_CURRENT = 3

constant int	POWER = 4

constant int	POWER_FACTOR = 5

constant int	ENERGY = 6

constant int	FREQUENCY = 7

constant int	TEMPERATURE = 8

constant int	HUMIDITY = 9

constant int	AIR_FLOW = 10

constant int	AIR_PRESSURE = 11

constant int	CONTACT_CLOSURE = 12

constant int	ON_OFF_SENSOR = 13

constant int	TRIP_SENSOR = 14

constant int	VIBRATION = 15

constant int	WATER_LEAK = 16

constant int	SMOKE_DETECTOR = 17

constant int	TOTAL_HARMONIC_DISTORTION = 18

constant int	MASS = 19

constant int	ELECTRICAL_RESISTANCE = 20

constant int	FLUX = 21

constant int	LUMINOUS_INTENSITY = 22

constant int	ACCELERATION = 23

constant int	MAGNETIC_FLUX_DENSITY = 24

constant int	ELECTRIC_FIELD_STRENGTH = 25

constant int	MAGNETIC_FIELD_STRENGTH = 26

constant int	ANGLE = 27

constant int	SELECTION = 28

constant int	FAULT_STATE = 29

constant int	POWER_QUALITY = 30

constant int	ROTATIONAL_SPEED = 31

constant int	LUMINOUS_ENERGY = 32

constant int	LUMINOUS_FLUX = 33

constant int	ILLUMINANCE = 34

constant int	LUMINOUS_EMITTANCE = 35

constant int	MOTION = 36

constant int	OCCUPANCY = 37

constant int	TAMPER = 38

constant int	DRY_CONTACT = 39

constant int	POWERED_DRY_CONTACT = 40

constant int	ABSOLUTE_HUMIDITY = 41

constant int	DOOR_STATE = 42

constant int	DOOR_LOCK_STATE = 43

constant int	DOOR_HANDLE_LOCK = 44

constant int	CREST_FACTOR = 45

constant int	DISTANCE = 46

constant int	LENGTH = 47

constant int	UNBALANCE_VOLTAGE = 48

constant int	PARTICLE_DENSITY = 49

constant int	DEW_POINT = 50

constant int	ELECTRICAL_IMPEDANCE = 51

constant int	TS_BYPASS_STATE = 52

constant int	BATTERY_LEVEL = 53

constant int	NONE = 0
	Sensor unit More...

constant int	VOLT = 1

constant int	AMPERE = 2

constant int	WATT = 3

constant int	VOLT_AMP = 4

constant int	WATT_HOUR = 5

constant int	VOLT_AMP_HOUR = 6

constant int	DEGREE_CELSIUS = 7

constant int	HZ = 8

constant int	PERCENT = 9

constant int	METER_PER_SEC = 10

constant int	PASCAL = 11

constant int	G = 12

constant int	RPM = 13

constant int	METER = 14

constant int	HOUR = 15

constant int	MINUTE = 16

constant int	SECOND = 17

constant int	VOLT_AMP_REACTIVE = 18

constant int	VOLT_AMP_REACTIVE_HOUR = 19

constant int	GRAM = 20

constant int	OHM = 21

constant int	LITERS_PER_HOUR = 22

constant int	CANDELA = 23

constant int	METER_PER_SQUARE_SEC = 24

constant int	METER_PER_SQARE_SEC = 24

constant int	TESLA = 25

constant int	VOLT_PER_METER = 26

constant int	VOLT_PER_AMPERE = 27

constant int	DEGREE = 28

constant int	DEGREE_FAHRENHEIT = 29

constant int	KELVIN = 30

constant int	JOULE = 31

constant int	COULOMB = 32

constant int	NIT = 33

constant int	LUMEN = 34

constant int	LUMEN_SECOND = 35

constant int	LUX = 36

constant int	PSI = 37

constant int	NEWTON = 38

constant int	FOOT = 39

constant int	FOOT_PER_SEC = 40

constant int	CUBIC_METER = 41

constant int	RADIANT = 42

constant int	STERADIANT = 43

constant int	HENRY = 44

constant int	FARAD = 45

constant int	MOL = 46

constant int	BECQUEREL = 47

constant int	GRAY = 48

constant int	SIEVERT = 49

constant int	G_PER_CUBIC_METER = 50

constant int	UG_PER_CUBIC_METER = 51

Additional Inherited Members
Public Types inherited from sensors::Sensor
enum	OnOffState { OFF , ON }
	Sensor states for DISCRETE_ON_OFF sensors. More...

enum	OpenClosedState { OPEN , CLOSED }

enum	NormalAlarmedState { NORMAL , ALARMED }

enum	OkFaultState { OK , FAULT }

Detailed Description

A sensor with numeric readings.

Definition at line 17 of file NumericSensor.idl.

Member Function Documentation

◆ getDefaultThresholds()

Thresholds sensors::NumericSensor::getDefaultThresholds ( )

Retrieve the sensor default thresholds.

Returns: Set of default thresholds

◆ getMetaData()

MetaData sensors::NumericSensor::getMetaData ( )

Retrieve the sensor metadata.

Returns: Sensor metadata

◆ getMinMax()

MinMax sensors::NumericSensor::getMinMax ( )

Get the min / max of sensor value.

Returns: Sensor min / max values

◆ getReading()

Reading sensors::NumericSensor::getReading ( )

Get the sensor reading.

Returns: Sensor reading, not rounded

◆ getThresholds()

Thresholds sensors::NumericSensor::getThresholds ( )

Retrieve the thresholds.

Note: In case of peripheral devices these thresholds may be overridden by the device slot configuration.

Returns: Set of configured thresholds

◆ setThresholds()

int sensors::NumericSensor::setThresholds ( in Thresholds thresh )

Change the thresholds.

Note: In case of peripheral devices these thresholds may be overridden by the device slot configuration.

Parameters

thresh New set of thresholds

Returns: 0 if OK; THRESHOLD_OUT_OF_RANGE if any threshold is out of range; THRESHOLD_INVALID if thresholds don't meet the requirements; THRESHOLD_NOT_SUPPORTED if threshold is not supported

Member Data Documentation

◆ THRESHOLD_INVALID

constant int sensors::NumericSensor::THRESHOLD_INVALID = 2

The threshold constraints are not met.

Definition at line 20 of file NumericSensor.idl.

◆ THRESHOLD_NOT_SUPPORTED

constant int sensors::NumericSensor::THRESHOLD_NOT_SUPPORTED = 3

The sensor does not support setting this threshold.

Definition at line 21 of file NumericSensor.idl.

◆ THRESHOLD_OUT_OF_RANGE

constant int sensors::NumericSensor::THRESHOLD_OUT_OF_RANGE = 1

The threshold exceedes the sensor range.

Definition at line 19 of file NumericSensor.idl.

The documentation for this interface was generated from the following file:

NumericSensor.idl

Classes

Public Member Functions

Public Attributes

Additional Inherited Members