EventEngine.idl

/* SPDX-License-Identifier: BSD-3-Clause */
/*
 * Copyright 2009 Raritan Inc. All rights reserved.
 */
 
/**
 * Event interface
 *
 */
 
module event {
 
    /**
     * Helper that is used wherever key/value pairs are required.
     *
     * @note This interface was designed before IDL maps were supported.
     */
    structure KeyValue {
        string key;     ///< Key
        string value;   ///< Value
    };
 
    /**
     * Event has a type:
     *   a STATE event indicates that a boolean state has been
     *     changed, i.e. asserted or deasserted
     *   a TRIGGER event is one that has no state assigned.
     *     conceptually it is asserted and deasserted at once.
     * The id has multiple components that form a path into a hierarchy.
     * The value ("asserted") indicates whether the state has become
     * true (assertion) or false (deassertion). For events of type TRIGGER
     * this will be true always.
     */
    structure Event {
 
        /** Event type */
        enumeration Type {
            STATE,                      ///< State event
            TRIGGER                     ///< Trigger event
        };
 
        Type            type;           ///< Event type
        vector<string>  id;             ///< Event id vector
        boolean         asserted;       ///< Assertion value
        time            timeStamp;      ///< UNIX timestamp (UTC)
        vector<KeyValue> context;       ///< Context map
    };
 
    /**
     * There is a single event engine instance reachable by a well known
     * reference.
     */
    interface Engine {
 
        /* Event registration and query */
        /* ---------------------------- */
 
        /**
         * An event descriptor.
         *
         * In case eventDescType is LEAF then the descriptor refers to a
         * 'real' event. In this case eventType is set and the entries vector
         * is empty. Otherwise eventType is a don't care and the entries vector
         * contains sub-entries. In case eventDescType is DYN_NODE then the
         * dynNodeContext contains a key which is used to generate a dynamic
         * node.
         */
        structure EventDesc {
 
            /** Event descriptor type */
            enumeration Type {
                NODE,                   ///< Intermediate node
                DYN_NODE,               ///< Dynamic node
                LEAF                    ///< Leaf node
            };
 
            Type eventDescType;         ///< Event descriptor type
            Event.Type eventType;       ///< Event type
            string dynNodeContext;      ///< Dynamic node context
            string idComp;              ///< Event ID component
            string name;                ///< User-defined name
            vector<EventDesc> entries;  ///< Child nodes
        };
 
        /**
         * Query existing event descriptors.
         *
         * @return 0 if OK
         * @return 1 if id was not found
         */
        int listEventDescs(in vector<string> eventIdPrefix,
                           out vector<EventDesc> eventDescs);
 
 
        /* Action definition and query */
        /* --------------------------- */
 
        /**
         * List all available action types. The action type is intentionally
         * defined generically so that implementation can be extensible without
         * changing interface.
         */
        vector<string> listActionTypes();
 
        /**
         * An action is a tuple of 'id' (unique within the scope of this event
         * engine), 'name' which is unique as well and used by the GUI as user
         * readable identificator, 'isSystem' which denotes the action as
         * system action, 'type' which defines what it is, and an argument
         * vector that vary depending on type and which is passed to the action.
         * The 'isSystem' flag is readonly and if set marks the action as not
         * deletable.
         */
        structure Action {
            string id;                  ///< Action ID
            string name;                ///< User-defined name
            boolean isSystem;           ///< \c true for system-defined actions
            string type;                ///< Action type
            vector<KeyValue> arguments; ///< Action argument map
        };
 
        /**
         * Add a new action.
         *
         * The id and isSystem fields are ignored. The actions's id field is
         * allocated automatically and returned in the actionId parameter.
         *
         * @return 0 if OK
         * @return 1 if the name of the new action already exists
         * @return 2 if generating the action id failed
         * @return 3 if the maximum number of actions have been created
         */
        int addAction(in Action action, out string actionId);
 
        /**
         * Modify an action.
         *
         * @return 0 if OK
         * @return 1 if the name of the new action already exists
         * @return 2 if the action id does not exist
         */
        int modifyAction(in Action action);
 
        /**
         * Remove an action.
         *
         * @return 0 if OK
         * @return 1 if id is unknown
         * @return 2 if the action is not deletable
         */
        int deleteAction(in string actionId);
 
        /**
         * List all actions currently know to this event engine.
         */
        vector<Action> listActions();
 
        /**
         * Trigger an action.
         *
         * This is mainly used for test and debugging. The operation will
         * block until the action has been performed or an error occurred.
         * In the latter case errMsg will contain an error message. The
         * context is passed to the actions.
         *
         * NOTE: Currently this function doesn't block!
         *
         * @return 0 if OK
         * @return 1 if id is unknown
         * @return 2 if no actor was found for the action
         * @return 3 if performing the action failed, errmsg will be set
         */
        int triggerAction(in string actionId, out string errMsg,
                          in vector<KeyValue> context);
 
        /**
         * Test an action.
         *
         * This is similar to {@link triggerAction}, except that an action
         * that is not yet saved can be passed in. Therefore this method
         * can be used for testing actions to be newly created. The
         * operation will block until the action has been performed or an
         * error occurred. In the latter case errMsg will contain an error
         * message. The context is passed to the actions.
         *
         * NOTE: Currently this function doesn't block!
         *
         * @return 0 if OK
         * @return 1 if the action name is invalid
         * @return 2 if no actor was found for the action
         * @return 3 if performing the action failed, errmsg will be set
         */
        int testAction(in Action action, out string errMsg,
                       in vector<KeyValue> context);
 
 
        /* Rule Definition and query */
        /* ------------------------- */
 
        /**
         * Condition is a logical combination of multiple events. Normally you
         * should use STATE events in logical conditions. In case a TRIGGER
         * event is part of a condition or logical operation it will per
         * default be interpreted as deasserted. The TRIGGER will evaluate as
         * asserted if that exact event was raised and is matched against the
         * event rules. In some sense the 'assertion state' of the TRIGGER is
         * true only at the moment the Event exists and set to false again once
         * it passed.
         */
        structure Condition {
 
            /** logical operation to be applied over all conditions and event */
            enumeration Op {
                AND,                    ///< Logical And
                OR,                     ///< Logical Or
                XOR                     ///< Exclusive Or
            };
 
            /** the match type how to match the event assertion state */
            enumeration MatchType {
                ASSERTED,               ///< Match if the event is asserted
                DEASSERTED,             ///< Match if the event is deasserted
                BOTH                    ///< Match both (for trigger events)
            };
 
            boolean negate;             ///< Negate the result
            Op operation;               ///< Logical operation to be applied
            MatchType matchType;        ///< Match type
            vector<string> eventId;     ///< Event ID
            vector<Condition> conditions; ///< List of subordinate conditions
        };
 
        /**
         * A Rule binds an action to a condition.
         *
         * The 'id' is an unique identification within the scope of this event
         * engine. The 'name' is unique as well and used by the GUI as user
         * readable identificator. The flag 'isAutoRearm' determines whether
         * actions are triggered again after condition reoccurres. The
         * 'hasMatched' flag is true if the condition was true once and the rule
         * is not rearmed yet. The 'isSystem' flag is readonly and if set marks
         * the action as not deletable. The 'actionIds' are the actions to
         * perform if the rule evaluates to true. The arguments are passed to
         * the actions.
         */
        structure Rule {
            string id;                  ///< Rule ID
            string name;                ///< User-defined name
            boolean isSystem;           ///< \c true for system-defined rules
            boolean isEnabled;          ///< \c true if the rule is enabled
            boolean isAutoRearm;        ///< \c true for auto-rearming rules
            boolean hasMatched;         ///< \c true if the rule has matched since being armed
            Condition condition;        ///< Trigger condition
            vector<string> actionIds;   ///< List of action IDs
            vector<KeyValue> arguments; ///< Argument map
        };
 
        /**
         * Add a new rule.
         *
         * The id, hasMatched and isSystem fields are ignored. The rule's
         * id field is allocated automatically and returned in the the ruleId
         * parameter.
         *
         * @return 0 if OK
         * @return 1 if the name of the new rule already exists
         * @return 2 if generating the rule id failed
         * @return 3 if the rule condition contains an invalid event id
         * @return 4 if the maximum number of rules have been created
         * @return 5 if the maximum number of actions per rule is exceeded
         */
        int addRule(in Rule rule, out string ruleId);
 
        /**
         * Modify a rule.
         *
         * The hasMatched and isSystem fields are ignored.
         *
         * @return 0 if OK
         * @return 1 if the name of the new rule already exists
         * @return 2 if the rule id does not exist
         * @return 3 if the rule condition contains an invalid event id
         * @return 4 if the maximum number of actions per rule is exceeded
         */
        int modifyRule(in Rule rule);
 
        /**
         * Enable a rule.
         *
         * An enabled rule will be evaluated when processing events.
         *
         * @return 0 if OK
         * @return 1 if id is unknown
         */
        int enableRule(in string ruleId);
 
        /**
         * Disable a rule.
         *
         * A disabled rule will be ignored when processing events.
         *
         * @return 0 if OK
         * @return 1 if ruleId is unknown
         */
        int disableRule(in string ruleId);
 
        /**
         * Delete a rule.
         *
         * @return 0 if OK
         * @return 1 if ruleId is unknown
         * @return 2 if the rule is not deletable
         */
        int deleteRule(in string ruleId);
 
        /**
         * List all rules.
         *
         * Question: will number of rules be small enough to list them
         *           all in a single operation.
         *           A single Rule may be quite large...
         *           See below for alternative interface using iterator.
         */
        vector<Rule> listRules();
 
 
        /* Deliver and confirm events. */
        /* --------------------------- */
 
        /**
         * Deliver an event.
         *
         * @return 0 if OK
         * @return 1 if event is unknown
         */
        int deliverEvent(in Event event);
 
        /**
         * Rearm an event rule that is active.
         *
         * Once a Rule triggers its actions it is done once. If the condition
         * of the rules becomes false and back again true, no action will be
         * performed unless the rule is rearmed. Rules may be auto-rearmed what
         * means whenever the rule's conditions changes from false to true
         * actions are triggered over and again.
         *
         * @return 0 if OK
         * @return 1 if the rule is unknown
         * @return 2 if the rule is not enabled
         */
        int rearmRule(in string ruleId);
 
    };
 
}